Publicacións

@article{lopez-cesar_deployable_2024,

title = {Deployable cylindrical vaults using dual-folding multiple crossed arches for emergency buildings},

author = {Isaac López-César and Manuel Muñoz-Vidal and Juan Pérez-Valcárcel and Manuel Freire-Tellado and Félix Suárez-Riestra},

url = {https://www.sciencedirect.com/science/article/pii/S2352012424020241},

doi = {10.1016/j.istruc.2024.107871},

issn = {2352-0124},

year  = {2024},

date = {2024-12-01},

urldate = {2026-07-28},

journal = {Structures},

volume = {70},

pages = {107871},

abstract = {This article describes a new deployable structural system referred to as a dual-folding multiple cross-arch cylindrical vault. The development of the system is described, based on the methodology detailed by the authors in a previous article, resulting in novel and interesting designs. The structural details designed to allow the folding and deployment movements are also described. Several models of the above elements built on a reduced scale are presented. Finally, a complete ¼-scale aluminium model of the structure was built to verify the kinematic conditions of folding and deployment. Deformational tests have been carried out with this model under gravitational load, which are also presented in this article, validating the viability of the system.},

keywords = {Deployable structures, emergency buildings, expandable structures, lightweight structures, Temporary buildings},

pubstate = {published},

tppubtype = {article}

}

@article{perez-valcarcel_deployable_2021b,

title = {Deployable bundle modulus structures with reciprocal linkages for emergency buildings},

author = {Juan Pérez-Valcárcel and Manuel Muñoz-Vidal and Félix Suárez-Riestra and Isaac R. López-César and Manuel J. Freire-Tellado},

url = {https://www.sciencedirect.com/science/article/pii/S0141029621009536},

doi = {10.1016/j.engstruct.2021.112803},

issn = {0141-0296},

year  = {2021},

date = {2021-10-01},

urldate = {2021-10-01},

journal = {Engineering Structures},

volume = {244},

pages = {112803},

abstract = {Deployable structures are an ideal solution for emergency buildings because of their lightness and compactness, allowing them to be transported to wherever they are needed. Generally the most frequent solutions use Scissor-like-Elements (SLE), but in this case the use of bundle modules is proposed. These systems were developed by Pérez Piñero, but have hardly been used since then. The article analyses the problems they present, as well as their advantages in reducing the number of bars and linkages required, which allows for the design of simpler and more economical structures. The geometrical and mechanical conditions of the linkages for triangular and square modules are analysed, as well as the typologies that may arise. A calculation method is also developed to analyse this type of structure. Finally, the performance of a flat grid is analysed in an analytical and experimental way using reciprocal links at its ends. Both theoretical calculations and experimental tests allow us to demonstrate the viability and efficiency of this new type of structure.},

keywords = {Bundle modulus, Deployable structures, emergency buildings, lightweight structures, reciprocal linkages, Temporary buildings},

pubstate = {published},

tppubtype = {article}

}

@article{perez-valcarcel_new_2020,

title = {A new reciprocal linkage for expandable emergency structures},

author = {Juan Bautista Pérez-Valcárcel and Félix Suárez-Riestra and Manuel Muñoz-Vidal and Isaac R. López-César and Manuel J. Freire-Tellado},

url = {https://www.sciencedirect.com/science/article/pii/S235201242030566X},

doi = {10.1016/j.istruc.2020.10.008},

issn = {2352-0124},

year  = {2020},

date = {2020-12-01},

urldate = {2020-12-01},

journal = {Structures},

volume = {28},

pages = {2023–2033},

abstract = {Expandable structures have certain qualities in terms of lightness and transportability which make them very useful as emergency buildings, a research line that is being developed by the authors. However, these structures have some disadvantages due to their reduced rigidity and great deformability, issues that could limit their use. This paper analyzes a reciprocal linkage that considerably improves one of the main problems of expandable structures, which is their lack of rigidity. The extremely strict geometrical conditions for this proposed linkage and the mechanical behaviour are examined. Two series of tests were carried out, with specimens formed by four bars supported reciprocally around the proposed linkage. In the first case, the bars had their ends simply resting on the base and in the second one displacement was restricted at their ends. Theoretical analysis and the experimental tests results are also included. The tests make it possible to define the failure patterns of the different elements of the linkages, bars or bolts. The theoretical models and the experimental results show that the proposed reciprocal linkages are highly effective. Tests of plane scissor meshes were also carried out using reciprocal linkages, showing a very significant reduction in their displacements.},

keywords = {emergency buildings, expandable structures, lightweight structures, reciprocal linkages, Temporary buildings},

pubstate = {published},

tppubtype = {article}

}