Publicacións

@article{sanchez-mendieta_relationships_2024,

title = {Relationships between density, porosity, compressive strength and permeability in porous concretes: Optimization of properties through control of the water-cement ratio and aggregate type},

author = {Carlos Sánchez-Mendieta and Juan José Galán-Díaz and Isabel Martínez-Lage},

url = {https://www.sciencedirect.com/science/article/pii/S2352710224024264},

doi = {10.1016/j.jobe.2024.110858},

issn = {2352-7102},

year  = {2024},

date = {2024-11-01},

urldate = {2024-11-01},

journal = {Journal of Building Engineering},

volume = {97},

pages = {110858},

abstract = {In this study, the relationships between density, porosity, compressive strength, and permeability in porous concretes were examined. Coarse aggregates, sourced both from natural riverbeds and through crushing, were used with water-to-cement ratios of 0.35, 0.38, and 0.41. Direct correlations were found between density and compressive strength, while porosity was inversely related to strength. Additionally, a direct correlation was observed between porosity and permeability. Adhering to the ACI 522R-10 standards resulted in compressive strengths approaching 12 MPa and permeabilities ranging from 13.5 to 26.1 mm s⁻1. These findings emphasize the importance of aggregate type and size in optimizing porous concrete properties without requiring fine aggregates or additives. Discrepancies with previous studies are attributed to variations in materials, mix designs, and testing methods. Thus, precise control of the water-to-cement ratio and careful aggregate selection are crucial for tailoring porous concrete to specific applications.},

keywords = {Compressive strength, Density, Permeability, Porosity, Porous concrete},

pubstate = {published},

tppubtype = {article}

}